Buy Low Price From Here Now
Asus P6T Core i7 / Intel X58/ DDR3/ CrossFireX & SLI/ A&GbE/ ATX Motherboard
Readmore
Technical Details
- Intel X58/ ICH10R chipset- ASUS TurboV
- 3-Way SLI & Quad-GPU CrossFireX Support
- ASUS Drive Xpert
See more technical details
By D. Orders
I used this MoBo to rebuild an aging Alienware computer. The main components are the P6T, Intel i7 975 Extreme, 6 gigs Corsair ram and 850 watt power supply, ATI 8570, and CoolerMaster V8 CPU cooler. Assembled everything, booted it up, and it's been running smoothly ever since. I had a very minor issue in that I wanted to setup 2 WD Velociraptor Hard Drives in raid one, and the raid setup screen went by so fast that I couldn't read it, but a little research told me to hit
I may try another 8570 in crossfire if the need arises, but so far there is no need. No crashes (Windows 7 Pro), no heat issues, and no complaints.
By Fusion (USA)
I am building a new system: got a i7 920, 3x2 (6G) Kingston 1600 DDR3 memory, and the ASUS P6T. I followed all directions about placement of DIMMs, spent an entire day trying different DIMM arrangements, but the BIOS would only recognize 4078 even though all 3 2G DIMMS were in place. I confirmed the memory was all OK. The problem seemed to be related to DIMM slot A1. I then searched GOOGLE and found MANY hits of others with this exact problem, but there were a number of different theories as to why. Some believe it is how the CPU was seated. Others, say it is a bent CPU pin on the MB. I've checked all, and cannot find anything obvious. So, I took the board back and instead got a "EVGA X58 x3". Added the memory, CPU and BAM - everything works fine.
Before investing in the ASUS, you might want to do further research to prepare for this problem. I read a lot of positive things about the P6T, but after all the headache I went thru, I am staying away from ASUS for now.
One other thing to note - make sure you get a power supply with the connector types for your specific motherboard. The one I had for the ASUS (Antec BASIC 500W) worked fine with the ASUS, but did not have to correct ATX 12V 8pin connector for the EVGA card and I could not find an adapter. I ended up getting a new power supply (CORSAIR 750W) that has the needed EPS/ATX12V 8pin connector. And in general, make sure the power supply you do select is powerful enough for what you want to accomplish - if you're going to run multiple graphics cards, have a number of SATA drives, and a high end CPU, get a good power supply > 500W.
By Y. Li
I have owned this motherboard for more than eight months. The main reason I bought this motherboard was its capability to adjust many parameters for overclocking.
Asus has an excellent reputation for its quality products. This one also has lots of nice things that I was looking for, such as all kind of ports (the usual USBs, Firewire, Ethernet, 7.1 audio HD plus an external e-sata) and overclocking features.
However, the overclocking really let me down. Whatever I overclocked, there's always the cold boot problem. Form time to tome I had to press the reset button to light the screen if it was a cold boot. If you google it, thousands of people owning the same motherboard have the exact same problem and do not have an solution.
In short, if you are not going to overclock your CPU, this is a good choice. Otherwise, try another one.
By John Doe
Excellent board, with a good BIOS with tons of options, good overclocker, plenty of connection options for just about anything. Don't see any need to spend more for a Deluxe V2, this board should handle most people's needs with ease.
By pgriffin
I was looking for a mobo for my i7 920 processor. Asus is known for their good motherboards. So far it is rack solid with one exception. The audio quality is poor. I get headaches if I listen to anything more than 5 minutes. You hear a faint static noise if the mouse wheel is scrolled up or down on any web page. I previously owned the ASUS P5AD2 and the audio quality was poor as well. I am not sure if this is my luck or all ASUS boards have some type of audio problems. Needless to say, I am in the process of getting a PCI audio card. That was my original plan anyway so I am willing to live with the on board audio issue.
If you are a overclocker and on a budget, you should definitely pick this board up. The BIOS exposes all the settings you need to up the speed and performance. Since I have only one video card, I can't comment on the SLI or Crossfire. It supports 24GB RAM in triple channel configuration. Some sites mistakenly list that the board only supports 12GB. I now have 6GB (3x2GB) and room for another (3x2GB). I doubt I need 12GB of RAM but if I do get the extra 6GB, I will setup a 5GB RAMDRIVE for games. Also, not sure why ASUS didn't extend the heatsink pipe from the north bridge to the south bridge. I think there is enough room to stick a long video card and have the pipe. All the on board external ports (i.e. USB, eSata, HDD activity LED, Audio, Power/reset buttons,...) are located at the very bottom of the mother board making it bit difficult to reach. Asus should have completely removed the IDE port and installed the aforementioned ports. Do people still use IDE drives?
Anyway, I would highly recommend this board even with the few shortcomings.
Images Product
Buy Asus P6T Core i7 / Intel X58/ DDR3/ CrossFireX & SLI/ A&GbE/ ATX Motherboard Now
No comments:
Post a Comment